Dascom LA48N/LA48W User Guide - Manual (Page 94)

Using Set-Up Mode
5-28
(Auto Switch)
2 SEC
4 SEC
6 SEC
8 SEC
10 SEC
12 SEC
14 SEC
16 SEC
18 SEC
20 SEC
Specify the timing of regarding the selected
protocol or interface as being inactive when
AUTO is specified in the or F TYPE> option.
2 seconds elapsed after data stops from the
computer
4 seconds elapsed after data stops from the
computer
6 seconds elapsed after data stops from the
computer
8 seconds elapsed after data stops from the
computer
10 seconds elapsed after data stops from the
computer
12 seconds elapsed after data stops from the
computer
14 seconds elapsed after data stops from the
computer
16 seconds elapsed after data stops from the
computer
18 seconds elapsed after data stops from the
computer
20 seconds elapsed after data stops from the
computer
600 BPS
1200 BPS
2400 BPS
4800 BPS
9600 BPS
19200 BPS
Setting of data transmission speed for the
serial interface. The baud rate is in bps (bits
per second). Select the same baud rate as
that used by your computer or modem.
Install Options Values Description