Apple PC Compatibility Card 7-inch card - Manual (Page 89)

Installing support software for Windows
Next, you need to install the Windows support software. Follow these steps:
1 If necessary, switch to the PC environment.
To switch to the PC environment from the Mac OS, press x- Return, or open
the PC Setup control panel and click Switch to PC.
2 Insert the PC Compatibility Card PC Software floppy disk.
3 In Windows, choose Run from the File menu. In Windows 95, click Start; then choose
Run from the menu that appears.
4 Type A:\SETUP; then press Return.
5 You’re asked if you want to install support for DOS or Windows. Press W for Windows.
6 Follow the instructions that appear on the screen.
The recommended directory to install files is C:\APPLE. To change this
location, click Set Location.
By default, all options will be installed. You may choose not to install specific
options. The installation options are:
m Install Macintosh/Windows Copy and Paste: allows you to transfer
Clipboard information between the Macintosh and PC environments.
m Install Macintosh/PC Folder Sharing: allows you to share a Macintosh
folder as a shared drive.
m Install CD-ROM Support: allows you to use the CD-ROM discs in the PC
environment.
7 When installation is complete, restart the PC by switching to the Mac OS (by pressing
x-Return), opening the PC Setup control panel, and clicking Restart PC.
You can also restart the PC by pressing the Control-Alt-… keys.
Configuring network support in Windows
To configure network support in Windows, see Appendix B, “Installing
Network Client Software.”
76 Chapter 4