Apple PC Compatibility Card 7-inch card User Manual

Page 26

Text mode
Original mode

Insert the long connector on the bottom edge of the card into the slot whose access port
cover you removed.

Line up the connector with the slot. The port on the card should face the port
access opening on the computer’s back panel. Press down firmly on the card
until the connector is fully inserted. Don’t force the card. If you meet a lot of
resistance, pull the card out and try again.

To see if the card is connected, pull it gently. If it resists, it is connected.

Installing the Card in a Power Macintosh 7200, 7500, or 7600