Apple PC Compatibility Card 7-inch card - Manual (Page 154)

3 Double-click the Network Icon in the Control Panel.
4 Click Add in the Network Configuration dialog box.
5 Select Adapter Component from the Network Component list, and then click Add.
6 In the Manufacturers list, select Detected Net Drivers.
7 In the Network Adapters list, select Existing ODI Driver, and then click OK.
The Network Configuration dialog box appears.
8 Click Add.
9 Double-click the Protocol icon.
10 In the Manufacturers area, select Microsoft. In the Network Protocols area, select TCP/IP.
11 To share files or your printer with other users on the network, click the File and Print
Sharing button.
12 Select the checkboxes in the dialog box to enable file or printer sharing, and then
click OK.
If file or printer sharing has been selected, “File and printer sharing for
Microsoft Networks” will appear in the Network Configuration dialog box.
13 Select the Identification tab at the top of the network configuration box.
14 Type in a unique name, work group name, and any description you would like for
the computer.
The computer must have a unique name to access the network. The work
group name is usually “WORKGROUP.”
15 Click OK.
16 Insert the Windows 95 installation CD-ROM or disk when prompted to do so.
17 When the System Settings Change dialog box prompts you to restart your computer,
click No.
18 Refer to “Running the Network Protocol Setup (SETNET) Utility” near the end of this
appendix and follow the instructions there.
146 Appendix B