Apple PC Compatibility Card 7-inch card - Manual (Page 107)

Printing from Windows 95
Before you print from Windows 95 for the first time and any time you change
printer drivers, you must follow these steps:
1 In Windows 95, open the Printers folder.
If no printers are installed, see your Windows 95 documentation for
instructions on how to add a printer.
2 Select the printer that you are printing to.
3 Choose Properties from the File menu.
A window appears.
4 Click Details.
The Details page appears.
5 Click the Spool Settings button.
A dialog box appears.
6 Click the button labeled “Disable bi-directional support for this printer.” Then click OK.
If this button is not available, click OK; then go on to the next step.
7 In the Properties window, click Port Settings.
The Configure LPT Port window appears.
8 Make sure the checkbox labeled “Check port state before printing” is unchecked. Then
click OK.
After selecting or changing to a PostScript printer driver, you must also
follow these steps:
9 In the Properties window, click PostScript.
10 Click Advanced.
A dialog box appears.
95 Setting Up the PC Environment