Apple PC Compatibility Card 7-inch card - Manual (Page 150)

NDIS 2.0 driver with the following protocols
m NetBEUI and IPX/SPX in Windows 95
m Microsoft’s TCP/IP and IPX/SPX in Windows 95
m NetBEUI and IPX/SPX in Windows for Workgroups
m Microsoft’s TCP/IP in Windows for Workgroups
m Client software for an OS/2 LAN Server in DOS, Windows, or Windows
for Workgroups
m Banyan Vines in DOS
Either the ODI or NDIS 2.0 driver with the following protocol
m NetManage’s Chameleon TCP/IP in Windows for Workgroups
If you are installing a protocol for use with an ODI driver, See “Installing
Protocols for Use With Open Data-Link Interface (ODI),” next. If you are
installing a protocol for use with an NDIS 2.0 driver, see “Installing Protocols
for Use With Network Driver Interface Specification (NDIS) 2.0,” later in
this appendix.
Installing protocols for use with Open Data-Link Interface (ODI)
Before you install a protocol for use with ODI, follow the steps in the next
section to install the NetWare client software. Then refer to the instructions
later in this section that describe installing and setting up the network
protocol you want to use.
Installing NetWare client software
Install NetWare client software before installing any ODI-compatible protocol.
Note: If you are installing Windows for Workgroups, the Novell NetWare
client, and TCP/IP support, it is easiest if you install the NetWare client first,
Windows for Workgroups second, and TCP/IP support third.
You need to know the Ethernet frame type in use on your network segment.
Your network administrator can give you this information.
142 Appendix B