Apple PC Compatibility Card 7-inch card - Manual (Page 143)

134
If your PC Compatibility Card is already installed, installing memory on the
card involves the following steps:
m opening the computer
m removing the card
m removing the existing DIMM, if one is installed
m installing the new DIMM
m replacing the card
m closing the computer
If the card is not installed, you need only remove the existing DIMM (if one
is installed), install the new DIMM, install the card, and close the computer.
Opening the computer
1 Turn off the computer.
Make sure the computer is plugged in but turned off.
2 Remove the lid from the computer.
For detailed instructions, see the earlier chapter in this manual on installing
the PC Compatibility Card in your computer model.
Removing the card
For detailed instructions, see the earlier chapter in this manual on installing
the PC Compatibility Card in your computer model.
1 If you haven’t already done so, remove the loopback cable from the port on the back of
the PC Compatibility Card.
2 Touch the metal part of the power supply case inside the computer to discharge any
static electricity that might be on your clothes or body.
Always do this before you touch any parts or install any components inside
the computer.
Appendix A