Apple PC Compatibility Card 7-inch card User Manual
Page 174
Installing client software for an OS/2 LAN server in DOS or Windows
Follow these steps to install the OS/2 LAN Server protocol for use with an
NDIS driver in DOS or Windows.
IMPORTANT
Do not use these instructions for installing the OS/2 client in
Windows for Workgroups. Doing so may create problems with your network.
For more information, see the previous section, “Using an OS/2 LAN Server
With Windows for Workgroups.”
1
Create three installation floppies from the OS/2 LAN Server CD.
2
Insert floppy 1 in the disk drive. Type the following:
A:\INSTALL
3
Verify the pathname for the installation and press Enter.
The default path is C:\NET.
4
In the list of network cards that appears, select “Network card not shown in list below”;
then press Enter.
5
Eject the disk and insert the floppy disk containing the NDIS2 driver. Press Enter twice.
6
Insert Disk 1 again; then press Enter.
7
Enter a machine name, user name, and domain name.
8
Follow the instructions on screen to finish the installation
9
Restart the PC.
10
Make sure your files contain the following lines:
PROTOCOL.INI
[network.setup]
version=0x3100
netcard=MacNDIS,1,MACNDIS
transport=ibm$netbeui,IBM$NETBEUI
lana0=MacNDIS,1,ibm$netbeui
[protman]
DriverName=PROTMAN$
PRIORITY=ibm$NETBEUI
166
Appendix B