Apple PC Compatibility Card 7-inch card - Manual (Page 171)

3 Click Drivers; then click Add Adapters.
4 Select “Unlisted or Updated Network Adapter.”
5 Insert the floppy disk containing the NDIS 2.0 driver. Verify the drive; then click OK.
6 You’ll see the message “PC Card Network Driver (NDIS2).” Click OK.
7 Click Close; then click OK.
8 Fill in the boxes labeled “User name,” “Workgroup,” and “Computer Name.” Then
click OK.
9 Refer to “Running the Network Protocol Setup (SETNET) Utility” near the end of this
appendix and follow the instructions there.
10 After running SETNET, make sure your PROTOCOL.INI file contains the following lines:
[NETWORK.SETUP]
VERSION=0X3110
NETCARD=MACNDIS,1,MACNDIS,1
TRANSPORT=MS$NDISHLP,MS$NDISHLP
TRANSPORT=MS$NETBEUI,NETBEUI
LANA0=MACNDIS,1,MS$NETBEUI
LANA1=MACNDIS,1,MS$NDISHLP
[PROTMAN]
DRIVERNAME=PROTMAN$
PRIORITY=MS$NDISHLP
[MACNDIS]
DRIVERNAME=MACNDIS$
PROTOCOLDOT2=”F0,E0,FF”
[MS$NDISHLP]
DRIVERNAME=NDISHLP$
BINDINGS=MACNDIS
11 Exit Windows.
12 Switch to the Mac OS by typing x-Return.
13 Click Restart PC in the PC Setup control panel.
163 Installing Network Client Software