Brocade Communications Systems CNA - Manual (Page 88)

70 Brocade Adapters Administrator’s Guide
53-1001256-01
SFP Management
6
SFP Management
The Port SFP dialog box enables you to display the properties that are associated with a selected
small form-factor pluggable (SFP) transceiver.
Displaying SFP information using the BCU
Enter the following command to view the SFP information. If the firmware detects a non-Brocade
SFP, the port is disabled.
bcu diag - -sfpshow <port_id>
Refer to “diag” on page 165 for details about this command.
Displaying SFP information using the GUI
1. Select a port in the device tree.
2. Click the SFP tab in the right pane.
3. The SFP Properties panel displays.
FIGURE 29 SFP Properties
Details about the port technology and extended link are described in Table 18 .