Brocade Communications Systems CNA - Manual (Page 145)

Brocade Adapters Administrator’s Guide 127
53-1001256-01
Remote Port Properties panel (HBA and CNA)
A
Remote Port Properties panel (HBA and CNA)
The Remote Port Properties panel enables you to display the properties that are associated with
the remote port.
Opening the properties panel
1. From the device tree, select a remote port (target or initiator).
2. Click the Remote Port Properties tab in the right pane.
NOTE
If it is a target port, there are two tabs in the right pane: Properties and LUNs.
Fields and components
Field Description
Fibre Channel Properties
Port WWN The world wide name of the device’s port.
Node WWN The world wide name of the device.
Symbolic Name The symbolic name associated with the remote port.
Name The name associated with the device.
Role The role of the device (target or initiator).
Target Rate Limiting Enforced The status of traffic rate limiting, either on or off.
QoS Priority The traffic priority (high, medium, or low) for a given source and
destination traffic flow, assigned by the Fabric operating system
(FOS). By default, all flows are marked as medium.
Bus # The unique identifying number for each PCI bus, assigned during
system initialization.
Target ID The identifier of the target device.