Brocade Communications Systems CNA - Manual (Page 64)

46 Brocade Adapters Administrator’s Guide
53-1001256-01
Name configuration
4
Importing properties in DCFM or FM format
You can use this procedure to import properties in DCFM or Fabric Manager (FM) format.
1. In the Configure Names dialog box, select DCFM/FM Format and then select Import.
2. Navigate to the location of the *.properties file from which you will import properties for the
selected device.
The format appears as follows:
# Names Export File V 1.0 : DO NOT DELETE / MOVE / MODIFY THIS LINE
# For each row in the file the name should be followed by an ','
# Column Format: WWN,Name,Type ,Description
# FM Names file Format [ Delimiter ',' ]
####################################################################
200000051e536b20,s,Node,
200000051e536b43,bfa0,Node,
100000051e536b20,a,Port,
100000051e536b44,bfa0_port1,Port,
100000051e536b43,bfa0_port0,Port,Adding a name and a WWN
3. Click OK.
DCFM support for FCoE
The converged network adapter (CNA) is supported in the Data Center Fabric Manager (DCFM),
version 10.3. DCFM 10.3 supports the following FCoE features:
• Virtual LANs (VLANs)
• Converged Enhanced Ethernet (CEE) switches and ports
• CEE maps
• Link Layer Discovery Protocol - Data Center Bridging Exchange (LLDP-DCBX) profiles
• Access control lists
• Spanning tree protocol
• 802.1x authentication
• FCoE login groups
• Virtual ports and trunks