Brocade Communications Systems CNA - Manual (Page 67)

Brocade Adapters Administrator’s Guide 49
53-1001256-01
VLAN configuration
4
The VLAN Configuration dialog displays.
FIGURE 15 VLAN Configuration dialog box
3. Click the Add button that corresponds to the VLANs table.
4. Click Add on the VLAN Configuration dialog ( Figure 15 ).
The Add VLAN dialog displays. Figure 16 shows a VLAN configuration before a passthru VLAN is
configured.
FIGURE 16 Add VLAN dialog box
5. Enter a VLAN identifier in the VLAN ID text box. The range is 1 to 4094.
6. Enter a VLAN name in the VLAN Name text box. The VLAN name must not exceed 31
characters.
7. (Optional) Click the Create Passthru checkbox to designate the VLAN as a Passthru VLAN.
8. Click OK.