Brocade Communications Systems CNA - Manual (Page 69)

Brocade Adapters Administrator’s Guide 51
53-1001256-01
VLAN configuration
4
3. Click Edit on the VLAN Configuration dialog ( Figure 15 ).
The Edit VLAN dialog displays.
FIGURE 19 Edit VLAN dialog box
4. Type a new name in the VLAN Name text box.
5. Click OK.
Removing a VLAN
You can access the VLAN Configuration dialog box by selecting an Ethernet port from the device
tree. This procedure provides instructions about how to remove an existing VLAN.
1. From the Ethernet port level, select an Ethernet port from the device tree.
2. Select Configure > VLAN Configuration from the main menu.
OR
Right-click an Ethernet port and select VLAN Configuration from the list.
The VLAN Configuration dialog displays.
3. Click Remove on the VLAN Configuration dialog ( Figure 15 ).
A warning dialog displays.
FIGURE 20 Remove VLAN dialog box
4. Click OK to remove the VLAN from the configuration.