Brocade Communications Systems CNA - Manual (Page 158)

140 Brocade Adapters Administrator’s Guide
53-1001256-01
VLAN Configuration dialog box (CNA only)
A
VLAN Configuration dialog box (CNA only)
The VLAN Configuration dialog box enables you to create a logical work group consisting of up to 64
VLANs. You can also add, edit, or remove VLANs using the VLAN Configuration dialog box.
Opening the dialog box
1. Select an Ethernet port from the device tree.
2. Select Configure > VLAN Configuration from the main menu.
OR
Right-click the host and select VLAN Configuration from the list.
The VLAN Configuration dialog displays.
Fields and components
Using the dialog box
Refer to the following topics for specific procedures using this dialog box:
• “VLAN configuration”
• “Adding a VLAN”
• “VLAN configuration conflicts”
• “Editing a VLAN”
• “Removing a VLAN”
Field Description
VLAN ID Displays a list of configured VLAN identifiers.
VLAN Name Displays a list of configured VLAN names.
Add button Click to launch the Add VLAN dialog box, which enables you to add a
VLAN.
Edit button Click to launch the Edit VLAN dialog box, which enables you to edit
the VLAN name.
Remove button Click to remove a VLAN. A confirmation error message displays.