Brocade Communications Systems CNA - Manual (Page 23)

Brocade Adapters Administrator’s Guide 5
53-1001256-01
Chapter
2
HCM Overview
In this chapter
• HCM software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
• HCM features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
• Tree node pop-up menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
• Operating system support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
HCM software
The Host Connectivity Manager (HCM) is a management software application for configuring,
monitoring, and troubleshooting Brocade HBAs and Converged Network Adapters (CNAs) in a
storage area network (SAN) environment.
The management software has two components:
• The agent, which runs on the host.
• The management console, which is the graphical user interface client used to manage the HBA
or CNA.
You can manage the software on the host or remotely from another host. The communication
between the management console and the agent is managed using JSON-RPC over https.
The information in this guide is intended for OEMs, field service personnel, and customers who are
installing Brocade hardware and HCM software.
NOTE
All HCM, utility, SMI-S Provider, boot software, and driver installation packages, as well as the Driver
Update Disk (DUD), are described in the Brocade Adapters Installation and Reference Manual.