Brocade Communications Systems CNA - Manual (Page 176)

158 Brocade Adapters Administrator’s Guide
53-1001256-01
bios
B
b pwwn,lun Specifies the host boots from the LUN information defined by the target port
world wide name (PWWN) and LUN value (lun*). Specify the PWWN as a
colon-separated value and the LUN as a 64-bit decimal value.
The LUN must be the same LUN that you bound to the CEE port using the
storage system’s management or configuration utility.
--disable Disables boot over SAN for the specified port, if enabled.
port_id Specifies the ID of the port for which you want to disable the boot over SAN
configuration.
See Also “boot (HBA only)”