Brocade Communications Systems CNA - Manual (Page 55)

Brocade Adapters Administrator’s Guide 37
53-1001256-01
HCM Logging levels
4
HCM Logging levels
You can set the log level for the following modules:
• Agent communication log, where all messages are exchanged between the HCM GUI
application and the HCM agent.
• HCM debug log, where messages are logged locally.
If you do not set an HCM log level, TRACE, which is the most verbose and the default, is used.
Configuring the HCM logging level using the GUI
1. Select Configure >HCM Logging Levels from the Host Connectivity Manager.
The Configure HCM Logging Levels dialog box displays.
FIGURE 11 Configure HCM Logging Levels dialog box
2. From both the Agent Communication Log and the HCM Debug Log lists, select one of the
following:
• Trace, which is the most verbose.
• Debug
• Info
• Warning
• Error
• Fatal, which is the least verbose.
3. Click Apply to apply the change.