Brocade Communications Systems CNA - Manual (Page 165)

Brocade Adapters Administrator’s Guide 147
53-1001256-01
BCU commands
B
Boot commands
boot over SAN commands apply to the 8 Gbps HBA only.
bcu boot --blunZone -c -p -r -l
--upload [adapter_id] [-a]
Converged Enhanced Ethernet (CEE) commands
bcu cee --query
--stats
--statsclr
Debug commands
bcu debug --portlog
--portlogclear
--portlogctl
Diagnostic commands
bcu diag --sfpshow
--tempshow
--beacon {on | off} []
--pciloopback [-p ] [-c ]
--loopback [-t ] [-s ]
[-c ] [-p ]
--memtest
--queuetest
Windows driver configuration commands
bcu drvconf --key
--val
Possible key_name and value ranges are:
•
key = bfa_ioc_queue_depth, value range [>0] default = 2048
•
key = bfa_lun_queue_depth, value range [>0] default = 32
•
key = ioc_auto_recover, value range [0-1] default = 1
•
key = rport_del_timeout, value range [>0] default = 90
•
key = msix_disable, value range [0-1] default = 1
Ethernet diagnostic commands
bcu ethdiag --loopback [-t ] [-c ] [-p pattern]
Ethernet IOC commands
bcu ethioc --enable
--disable
--stats
--statsclr
--query
Ethernet Log command