Brocade Communications Systems CNA - Manual (Page 60)

42 Brocade Adapters Administrator’s Guide
53-1001256-01
Name configuration
4
Editing the name fields
Only the name, the world wide name (WWN), and the description fields are editable. Depending on
the component, the following occurs when you edit the name fields:
• Name changes on the adapter and ports are sent to the agent and stored in the *.properties
file.
• Name changes on remote ports and virtual ports are sent to the *.properties file local to the
HCM application but are not sent to the agent.
1. Select an HBA, an HBA port, a Virtual Port, a CNA or a CEE port from the device tree.
2. Select Configure > Names from the Host Connectivity Manager.
OR
Right-click a device from the device tree and select Configure > Names.
The Configure Names dialog box displays all the discovered and detached (undiscovered)
names.
FIGURE 13 Configure Names dialog box
3. Select a row and edit the name, the WWN, and the description, as needed.
4. Click OK.