Konica Minolta bizhub 362 - Manual (Page 93)

Setting up network printing 3
362/282/222 3-35
For Mac OS X
1
On the Apple menu, select “System Preferences”.
2
Click the “Network” icon.
3
From “Show”, select “Built-in Ethernet”.
– For Mac OS X 10.5, select “Ethernet”, and then click the [Advanced]
button.
4
Click the TCP/IP tab.
5
Select the items from “Configure” that correspond to the network set-
tings for the Macintosh computer that is connected to the network, and
then set the IP address and subnet mask.
6
If using an AppleTalk connection, click the AppleTalk tab, and then
check that the “Make AppleTalk Active” check box is selected.
7
Click the close button at the top left of the dialog box.
– For Mac OS X 10.2/10.3/10.4, the “Apply configuration changes?”
message appears.
– For Mac OS X 10.5, the “This service has unsaved changes” mes-
sage appears.
8
Click the [Apply] button.
The AppleTalk and Ethernet settings are saved.