Konica Minolta bizhub 362 - Manual (Page 68)

Setting up network printing 3
362/282/222 3-10
4
Specify settings for the following:
– Enable Windows Printing Service: Set whether to use the Windows
printing service. Select “Enable” here.
– NetBIOS Name: Specify the NetBIOS name. Up to 15 of the follow-
ing alphanumeric characters and symbols can be used.
Uppercase and lowercase letters, numbers, hyphens (-), and un-
derscores (_).
– Printing Service Name: Specify the printing service name. Up to 12
alphanumeric characters can be used, excluding the following
characters.
Spaces, backslashes (\), and commas (,).
– WorkGroup Name:Specify the work group name. Up to 15 alphanu-
meric characters can be used, excluding the following characters.
\ * + = | : ; “ ? < > ,.
5
To apply the settings, restart this machine (turn the main power off,
then on again).
2
Reminder
When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The ma-
chine may not operate correctly if it is turned on immediately after being
turned off.