Konica Minolta bizhub 362 - Manual (Page 333)

Various settings 10
362/282/222 10-76
Network tab - Common Setting - AppleTalk
You can specify the AppleTalk settings.
2
Reminder
To apply any changes to settings for “Printer Name” or “Zone Name”, re-
start this machine (turn the main power off, then on again).
When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The ma-
chine may not operate correctly if it is turned on immediately after being
turned off.
Item Description
AppleTalk Specify whether to enable AppleTalk.
Printer Name Enter the printer name (up to 31 alphanumeric characters, excluding
= ~).
Zone Name Specify the zone name (up to 31 alphanumeric characters, excluding
= ~).
Current Zone Displays the current zone name.