Konica Minolta bizhub 362 - Manual (Page 358)

Appendix 12
362/282/222 12-8
12.5 Installing an additional PS driver that uses a different
number of bits onto Windows Server 2008
If an additional PS driver for a 32-bit operating system is installed onto the
64-bit operating system of Windows Server 2008 or if an additional PS driver
for a 64-bit operating system is installed onto the 32-bit operating system of
Windows Server 2008, the additional driver may not be installed correctly on
the Windows Server 2008 print server.
This can be corrected by specifying the setup information file (ntprint.inf) for
the operating system with the different number of bits when installing the ad-
ditional driver onto Windows Server 2008.
As an example, the following procedure describes the operations performed
when installing an additional PS driver for the Windows Vista 32-bit operating
system onto the 64-bit operating system of Windows Server 2008.
(When installing an additional PS driver for a 64-bit operating system onto
the 32-bit operating system of Windows Server 2008, switch “64-bit” and
“32-bit” in the following procedure.)
Preparation
From the Windows Server 2008, map the system drive of the client computer
as a network drive.
1
Set up the computer running the 64-bit Windows Server 2008 operat-
ing system as the printer server, and set up the computer running the
32-bit Windows Vista operating system as the client computer.
2
Specify as a shared drive the drive installed with the 32-bit operating
system (normally, drive C) of the client computer prepared in step 1.
3
Open “My Computer” on the 64-bit operating system of Windows
Server 2008, and then click “Map Network Drive” in the “Tools” menu.