Downloading setup files from qml logger – Vaisala Hydromet Data Collection Platform User Manual
Page 85
Chapter 3 _______________________________________________________ AWS Client Software
VAISALA_______________________________________________________________________ 83
The following describes the main principles of the secure setup upload
procedure:
-
AWS Client verifies that there is sufficient disk space in the logger.
-
AWS Client loads the new setup to a temporary location in the
logger, that is, /Ext or /Log, depending on whether an external CF
card is available.
-
The logger validates the integrity and target firmware version of
the new setup file.
-
The logger attempts to start the new setup from the temporary
location.
-
If the startup is successful, the logger replaces the previous setup
with a new one.
-
If the startup fails, the logger restarts once again using the previous
setup. After restart, failure is indicated by the error message
Startup Failed (setup name), which is shown always at the logger
command prompt, and by AWS Client in dialog if possible
(depends on the service connection used).
Downloading Setup Files from QML
Logger
With AWS Client, you can download the setup file currently in use in
the QML logger. This can be useful for troubleshooting purposes. To
download the setup file currently in use in the QML logger, proceed as
follows:
1.
In the Maintenance menu, select Setup File and then Download
from Logger.
2.
Select the folder to which the setup file is downloaded. The default
folder is the one specified in the AWS Client Options window.
3.
Downloading the setup file from the QML logger starts; you can
follow the download process in the window displayed (see