Vaisala Hydromet Data Collection Platform - Manual (Page 58)

User's Guide ______________________________________________________________________
56 ___________________________________________________________________M210784EN-E
Setup file upload
directory Default upload directory for QML logger setup
files. You can either enter the path for your
directory or select Browse and browse for the
directory.
PDF reader path Location of the PDF reader on the workstation on
which the AWS Client is installed. The AWS Client
help file is in PDF format and needs a reader.
Trace log directory AWS Client logs the information sent by the QML
logger during the terminal session to a file. The
trace log directory specifies the location of the
trace log.
Trace log on When selected, the Trace log on option causes a
trace log to be created. For troubleshooting
purposes, you can, for example, log your
commands and the responses given by the QML
logger.
Sleep commands
enabled Enables the Sleep command for setting the QML
logger to a power-saving mode as well as the
Wakeup command for powering up the logger
after it is put to sleep.
Send close before
open Always send the Close command before
attempting to open terminal connection.
Secure setup upload Use secure setup upload procedure when
uploading the setup. Using this option will cause
the setup upload to take more time, but using the
option is recommended especially when
uploading setups over an unreliable connection.
Terminal line wrap Folds overlong lines in the terminal window onto
the next line.
Command line length Maximum length for a command sent from the
command line to the QML logger. The default
value is 80 characters. This can be set to a
smaller value, which, however, must match the
value specified in the setup file on the logger. For
URL settings, this 80 characters might not be long
enough, and the value has to be set higher.
Reset timeout
(seconds) Maximum time to wait for the logger to execute
reset.
GSM Modem PIN The PIN code for the GSM modem SIM card.
Function Key
Mappings The function key mappings can be used for
mapping frequently used QML logger shell
commands to the function keys on your keyboard.
Example (note that the command ends in a
carriage return):
SYSINFO
Table 8 Settings in AWS Client Options Window
(Continued)
Setting Description