Vaisala Hydromet Data Collection Platform - Manual (Page 80)

User's Guide ______________________________________________________________________
78 ___________________________________________________________________M210784EN-E
Entering Values for Manual Sensors
With AWS Client, you can enter values for each manual sensor
included in your QML logger setup.
To enter values for manual sensors, proceed as follows:
1. On the Settings menu, select Manual Sensors. The list of
configured manual sensors is displayed (see
Figure 39 on page 77 ).
2. Select the sensor for which you want to enter values from the list.
3. Select Edit. The information on the sensor is displayed (see Figure
40 on page 78 ).
0802-149 Figure 40 Entering Values for Manual Sensor
4. Enter the value for the manual sensor in the Value field.
NOTE The values you enter for the manual sensors must match the manual
sensor value type: Integer, Float, or Text. The Save button is disabled
in the Manual Sensor window if the entered value is not of the correct
type.