Uploading setup file – Vaisala Hydromet Data Collection Platform User Manual
Page 82
User's Guide ______________________________________________________________________
80 ___________________________________________________________________M210784EN-E
Uploading Setup File
You need to upload the setup file in two situations:
-
When you start using the QML logger for the first time.
-
When your system has been updated, for example, when new
sensors have been added.
After a system update, the setup file needs to be updated to match the
changes. Normally, you need to modify the setup file yourself with
Lizard Setup Software. After you have finalized with Lizard, you have
to open the AWS Client terminal software in order to be able to upload
the setup file as follows:
1.
On the Maintenance menu, select Setup File - Upload to Logger.
2.
The Select File window is displayed as shown in
. Select the appropriate setup file and click Select File. Note that
the default folder for uploading setup files is defined in the AWS
Client Options window.
CAUTION
Also notice that the settings you define in the setup file must match the
communication settings you make in the AWS Client Address Book
and the station-specific settings for common and static parameters.
CAUTION
When you upload a new setup, the system erases all data log files from
the QML logger. Make sure you download the files you want to save
before uploading the new setup. For more information on downloading
data log files, see section
Downloading Log Files on page 91
also recommended to download the current QML logger setup file to
your PC before uploading a new one. For instructions, see section
Downloading Setup Files from QML Logger on page 83
.
NOTE
It is recommended that you use the Secure setup upload option,
described in
NOTE
If a completely new setup is loaded onto a logger that contains an
existing setup, follow the procedure described in section
.