Reset using the reset button, Figure 57, Reset button on qml logger – Vaisala Hydromet Data Collection Platform User Manual
Page 106
User's Guide ______________________________________________________________________
104 __________________________________________________________________M210784EN-E
2.
Select OK. The logger reset will start after the delay
specified in the previous step.
Once the reset is complete and the setup is running without problems,
the AWS Client terminal window displays the text Setup running ok,
and the logger is again ready for use.
Reset Using the Reset Button
As an alternative to resetting the QML logger using AWS Client, you
can also press the reset button, indicated by number 1 in
1004-122
Figure 57
Reset Button on QML Logger
A short reset (pressing the reset button quickly) performs the same reset
as giving the command and starts the program again. A long reset
(pressing the reset button and keeping it down for a few seconds)
restarts the program with a so-called blank setup. A blank setup does not
run a setup file.
Blank setup may be useful if the setup is somehow defective and does
not allow the opening of a terminal connection. When blank setup is
run, the QML logger communication parameters are restored to their
defaults: COM0, 9600, N, 8, N, 1.