Ag Leader ParaDyme Radio Option Kits Hardware Installation Guide - Manual (Page 35)

Hardware Installation Guide 29
900 MHz RTK Radio Modem Kit Installation Procedure (200-0505-04 Kit)
10. Attach the 900 MHz radio modem with four M2 x 14mm screws. Torque the three screws to 2 in-lb (0.2 Newton meters)
with a #0 Phillips driver.
Figure 4-23 900 MHz Radio Modem Installed
11. Insert two standoff saddles in the existing holes on the circuit board at locations labeled MP2 and MP3.
Figure 4-24 Standoff Saddle Mounting Holes Location
Standoff Saddles