Ag Leader ParaDyme Radio Option Kits Hardware Installation Guide - Manual (Page 32)

26 Radio Option Kits
900 MHz RTK Radio Modem Kit Installation Procedure (200-0505-04 Kit)
5. Remove the plug from the ParaDyme Smart Antenna housing for the radio coax connectors with an 8mm Allen wrench.
Figure 4-18 Remove Plug
Note: For ParaDyme systems with Part Number 200-0473-02 or earlier, the exiting coax cable that was installed will
need to be removed and replaced with the cable shown in Step 6, because the cable ends that connect to the radio
modem are different. Once the existing cable has been removed, continue to Step 6.
Radio Modem Coax Access Port Plug