Ag Leader Intellislope Ver.5.2 Operation Manual - Manual (Page 35)

31
G
RADE
C
ONTROL
G RADE C ONTROL
G RADE C ONTROL
A
BOUT
G
RADE
C
ONTROL
If you have tiled with a laser, Grade Control should be natural. You select grade and grade break the
same as with a laser. Grade Control is very similar in operation. The key advantage is that all
adjustments are made in the cab instead of at the tripod.
R
UNNING
G
RADE
C
ONTROL
Press the Mode button on the map screen and then
select Grade Control and Install on the Select Mode
screen.
“Up” and “Down” buttons are used to
raise or lower the cutting edge of the
machine before engaging automatic
control.
Auto Level: Automatically levels the
cutting edge of the plow as it is lowered
to its starting position (pitch plow).
Start Install button: Once the cutting
edge of the machine has been lowered to
its starting position, pressing this button
will cause Intellislope to control the
Target Grade and Grade Break as the
vehicle progresses forward.
WARNING: When pushing autolevel make sure people are clear, as the machine will move.
Select Mode
Manage Surveys
Survey Mode
Grade Control
Install Mode