Ag Leader Intellislope Ver.5.2 Operation Manual - Manual (Page 22)

18 Firmware Version 5.2
Drive to the location where you want to
start the survey and press
Drive the path where tile will be placed.
At the end of the path press
Confirmation Screen will appear.
Press to end survey.
S
URVEYING WITH
P
LOW
When surveying with the installation tractor, the plow must be completely raised so the GPS antenna
distance to ground is consistent for every run and matches the Antenna Distance To Ground entered in
the display.
For pull type plows, make sure the wheels are all the way down, and the plow shank is pitched up. For mounted, or
3pt mounted plows make sure the linkage is all the way up, and the plow shank is all the way up.
Start Survey
Stop Survey