Ag Leader Intellislope Ver.5.2 Operation Manual User Manual

Page 23

Text mode
Original mode

URVEY

Press

to view Select Mode

Screen.

Select Survey mode.

Drive to the location where you want to
start the survey and press

Then press “Start Survey”

“Start Survey” will change to “Stop”.

As you drive, your path will be indicated
with a green line.

Try to get as close to the outlet or main
connection as possible (whether at the
start of the survey, or the end of the
survey, doesn't matter), before ending
the survey, but do not back up or make a
loop around the starting hole while you
are still surveying. Drive past the start of
installation and near it if possible.

Drive the path where tile will be placed.
At the end of the path press

Confirmation Screen will appear.

Press

to end survey.

Mode

Start Survey

Stop Survey