HP 4000.6000.8000 Enterprise Virtual Arrays - Manual (Page 72)

• Fault Management—displays fault information. Information about the Fault Management menu
is included in Controller fault management .
• Shutdown Options—initiates the procedure for shutting down the system in a logical, sequential
manner. Using the shutdown procedures maintains data integrity and avoids the possibility of
losing or corrupting data.
• System Password—create a system password to ensure that only authorized personnel can
manage the storage system using HP Command View EVA.
To enter and navigate the storage system menu tree:
1. Press any push button while the default display is in view. System Information becomes the active
display.
2. Press to sequence down through the menus.
Press to sequence up through the menus.
Press to select the displayed menu.
Press to return to the previous menu.
NOTE:
To exit any menu, press Esc or wait ten seconds for the OCP display to return to the default display.
Table 24 identifies all the menu options available within the OCP display.
CAUTION:
Many of the configuration settings available through the OCP impact the operating characteristics of
the storage system. You should not change any setting unless you understand how it will impact system
operation. For more information on the OCP settings, contact your HP-authorized service representative.
72 Enterprise Virtual Array hardware components