HP 4000.6000.8000 Enterprise Virtual Arrays - Manual (Page 116)

NOTE:
Components without an individual product certification label are qualified as part of the next higher
assembly (for example, enclosure, rack, or tower).
Figure 55 Typical enclosure certification label
NOTE:
The certification symbols on the label depend upon the certification level. For example, the FCC Class A
certification symbol is not the same as the FCC Class B certification symbol.
Fibre Channel drive enclosure specifications
This appendix defines the physical, environmental, and power specifications of the Fibre Channel drive
enclosure and the elements.
Physical specifications
This section describes the physical specifications of the drive enclosure and elements.
WARNING!
An assembled enclosure (all elements installed) weighs more than 29.5 kg (65 lb) and requires a
minimum of two individuals to move.
Table 30 defines the dimensions and weights of the enclosure.
Table 30 Drive enclosure physical specifications
NOTE: Metric dimensions are expressed in whole numbers. For example, 10.795 cm is expressed as 108
mm. Millimeter dimensions are always expressed in whole numbers.
Shipping
Empty Installed Carton Carton and pallet
Height 131 mm (5.16
in)
131 mm (5.16 in) 641 mm (25.25 in) 768 mm (30.25 in)
Width 505 mm
(19.875 in)
505 mm (19.875
in)
318 mm (12.5 in) 610 mm (24 in)
Depth 448 mm
(17.625 in)
448 mm (17.625
in)
597 mm (23.5 in) 1016 mm (40 in)
Weight 10.9 kg (24 lb) 30.9 kg (68 lb) 43.6 kg (96 lb) 49 kg (108 lb)
116 Regulatory notices and specifications