HP XP P9500 Storage - Manual (Page 688)

Used to display the information for copy groups whose IDs are specified in the YKMONCG file.
The information to be displayed is specified by the following sub-operands:
CGID =copy-group-ID ~
Used to specify the ID of the copy group for which you want to display the
information. If the specified copy group ID does not exist in the YKMONCG file, the
REPORT
request is canceled.
output-type ~ <
Use the following options to specify the information to be displayed.
•
SUMMARY
Number of copy pairs by copy pair status
•
DETAIL
Details by copy pair
•
STATS
Operational information for copy groups. This information can be displayed
only when the copy type is TrueCopy Asynchronous for Mainframe or
Continuous Access Journal Z.
•
RPO
Consistency information on copy groups. This information can be displayed
only when the copy type is TrueCopy Asynchronous for Mainframe or
Continuous Access Journal.
message-level ~ <>
Specify the level of the message to be output. Specifiable values are CONS, ERROR,
STATUS
, and INFO.
For details on message levels, see the HP XP P9000 for Business Continuity Manager Reference
Guide for the description on parameters in the YKMONOPT file.
If you only want to specify the message level and omit the output type, type ,, (two commas) as
shown in the following example:
MODIFY YK,REPORT CGID=BCMCG,,CONS
Example
To display the operational information for the copy group (copy group ID: BCMTC) in the BCM
Monitor instance whose ID is YK, enter the following command:
MODIFY YK,REPORT CGID=BCMTC,STATS
SET command
To change the values specified in BCM Monitor parameter files after BCM Monitor has started,
use the MODIFY SET command. The following values can be modified:
•
CYCLETIME
•
WAITTIMEOUT
•
The monitoring status of a copy group
•
MSGLEVEL
688 Automatic operation using BCM Monitor