Preparing the configuration files (hyperswap) – HP XP P9500 Storage User Manual
Page 215
Preparing the Configuration Files (HyperSwap)
lists the configuration files required for using Business Continuity Manager in
a 2DC configuration with HyperSwap and Continuous Access Journal Z configuration.
Table 66 Required Configuration Files (HyperSwap)
Remarks
Description
Item
—
Disk configuration definition files are
required at the primary storage
Disk configuration definition file
system, local storage system, and
remote storage system.
This item is not necessary if you use
Remote Web Console to set up logical
paths.
The following path sets are required
for logical paths.
Path set definition files
•
An inter-control unit logical path
(bidirectional) must be established
between the primary and local
storage system.
•
An inter-disk controller logical path
(bidirectional) must be established
between the primary and remote
storage system.
An inter-disk controller logical path
(bidirectional) must be established
between the local and remote storage
system.
Set this item before starting a copy
operation.
The following route lists are required:
Route list definition file and command
device definition file
•
A route for normal operations
From the local storage system to
the remote storage system
The name of the route list for monitoring
HyperSwap must be different from the
name of the route list for working
•
A route for local storage system
failures
From the primary storage system to
the remote storage system
around local storage system troubles.
Do not use these route lists at the same
time.
•
Routes for primary host failures
From the remote storage system to
the primary storage system
From the remote storage system to
the local storage system
--
The following files are required:
Copy group
definition file
•
Copy group definition files for the
Cont Ac-S Z copy groups with the
HyperSwap attribute
•
Copy group definition files for the
Universal Replicator copy groups
•
Copy group definition files for the
Delta Resync pair
For the S-VOL of the Delta Resync
pair, specify the same journal
group as for the S-VOL of the
Universal Replicator copy group,
using a different mirror ID.
shows how to prepare the configuration files at each site.
Defining a 2DC configuration with HyperSwap and Cnt-Ac J Z
215