HP XP P9500 Storage - Manual (Page 558)

4. From the local site, execute the YKRECVER command for the primary-to-remote Cnt Ac-J Z
copy pair whose P-VOL is located in the storage system in which the failure occurred.
An I/O error might occur during execution of the YKRECVER command, but the error causes
no problem.
•
YKQUERY
•
YKRECVER
•
YKEWAIT GOTO(SIMPLEX) NOINVALIDCHK
5. From the local site, execute the YKRESYNC REVERSE command for the Cnt Ac-S Z copy group
container.
•
YKQUERY
•
YKRESYNC REVERSE
•
YKEWAIT GOTO(DUPLEX)
558 Maintenance and troubleshooting operations