HP XP P9500 Storage - Manual (Page 274)

1. From the primary host, perform a Local Scan on the primary site storage system.
2. From the local host, perform a Local Scan on the local site storage system.
3. From the remote host, perform a Local Scan on the remote site storage system.
4. Transfer the disk configuration definition file containing the scan results of each site to all other
sites so that each site will have the scan results from all sites.
Setting up an environment at the primary site
1. From the primary host, define a path set that consists of an inter-control unit logical path
(Primary -> Local) and an inter-disk controller logical path (Primary -> Remote) (or specify these
paths by using Storage Navigator).
2. From the primary host, define a route list (Primary -> Local and Primary -> Remote routes).
274 Configuration definitions