HP XP P9500 Storage - Manual (Page 190)

Table 56 Required route list (3DC Multi-Target (Cnt Ac-J Z x Cnt Ac-J Z) configuration) (continued)
Required route list Remote site 2
state Remote site 1
state Primary site
state Host on which Business
Continuity Manager is
started
Remote 2
→ Primary
Usable Unusable Usable
Remote 2
→ Remote 1
Usable Usable Unusable
Not required Usable Unusable Unusable
Legend:
Usable: The target site can be used.
Unusable: The target site cannot be used because of an error.
The following table shows how to prepare the configuration files at each site.
Table 57 How to prepare the configuration files at each site (3DC Multi-Target (Cnt Ac-J Z x Cnt Ac-J Z)
configuration)
How to prepare Contents File type
At the remote site 2 At the remote site 1 At the primary site
Transfer from the
primary site Transfer from the
primary site Perform a Local
Scan The primary site configuration Disk configuration
definition file
Transfer from remote site
1 Perform a Local Scan Transfer from remote
site 1 The remote site 1 configuration
Perform a Local Scan Transfer from remote site
2 Transfer from remote
site 2 The remote site 2 configuration
Not required Not required Define a path set An inter-disk controller logical
path between the following sites: Path set definition
file
•
Primary site
→ Remote site 1
• Primary site → Remote site 2
Not required Define a path set Not required An inter-disk controller logical
path between the following sites:
•
Remote site 1
→ Primary site
• Remote site 1 → Remote site
2
Define a path set Not required Not required An inter-disk controller logical
path between the following sites:
•
Remote site 2
→ Primary site
• Remote site 2 → Remote site
1
Not required Not required Define a route list A route/command device
between the following sites: Route list definition
file and command
device definition file
•
Primary site
→ Remote site 1
• Primary site → Remote site 2
Not required Define a route list Not required A route/command device
between the following sites:
•
Remote site 1
→ Primary site
• Remote site 1 → Remote site
2
190 Configuration definitions