HP XP P9500 Storage - Manual (Page 623)

Command ===> ADD Scroll ===> PAGE
.------------------------------------------------------. 1/08/16 10:24:32
Rou | Add Route Entry |
| Command ===>
|
Sup | |
--- | Add a storage system to the route list : MULTI | -----
AC- | | SN)--
*** | Select either of the following numbers, depending | ******************
| on the type of storage system you want to register: |
| 1 1. A storage system discovered via a |
| local scan or a remote scan |
| 2. A new storage system discovered via a |
| remote scan |
| |
| DADID and serial number of the storage system: |
| DADID . .
|
| SN . . . |
| |
| F1=Help F12=Cancel |
'------------------------------------------------------'
F1=Help F3=Exit F5=Add F7=Backward F8=Forward F10=Prev
F11=Next F12=Cancel
3. Press the Enter key.
Selectable pairs of storage system serial numbers and device address domain IDs are displayed
in the Storage System Selection List panel.
4. Specify s in the AC column for the storage system serial number and device address domain
ID pair that you want to select.
Defining a route list 623