HP XP P9500 Storage User Manual
Page 659
1.
In the Copy Group Selection List panel, specify e in the AC, for the copy group container,
and press the Enter key.
Copy Group Selection List Row 1 to 14 of 18
Command ===>
Scroll ===> PAGE
2008/03/04 11:13:34
Supported actions: b(Browse), e(Edit), d(Delete)
AC Copy Group ID --------------------------- Description --------------------
e CG.UR
GRP2RSI
DUP1
DUP2
GRP.GRP1UR.ID
GRP1UR
BC
SUS1
SUS2
CAABC
******************************* Bottom of data ********************************
F1=Help F3=Exit F5=Add F7=Backward F8=Forward F12=Cancel
The Copy Group Detail Definition panel appears.
2.
Specify the following:
•
Enable EXCTG Attributes: /
•
EXCTG ID(Forward): EXCTG ID
•
S of Secondary: S, which indicates a supervisor disk controller
•
ArbCdev of Secondary: An arbitration command device number
If you use the reverse copy direction (the direction from the secondary site to the primary site),
specify the appropriate values for EXCTG ID(Reverse), S of Primary, and ArbCdev of Primary.
Copy Group Detail Definition Row 1 to 2 of 2
Command ===>
Scroll ===> PAGE
2008/03/04 11:22:28
Copy Group Type : CAJ Copy Group ID : CG.UR
Description . . . . . . . . . . . . .
Primary Device Address Domain . . . : SF
Secondary Device Address Domain . . : LA
/ Enable EXCTG Attributes EXCTG ID(Forward) 0 EXCTG ID(Reverse) 3
------------------------------------------------------------------------------
Supported actions: e(Edit), d(Delete) / Use Container
Grp C/T ID Primary ----------- Secondary --------- Path ID
AC Num sub Pair(s) S S/N ArbCdev S S/N ArbCdev
1 01
01 4 S 14002
14001 2221
00
2 02
02 4 14004 2222
S 14003
00
******************************* Bottom of data ********************************
F1=Help F3=Exit F4=Attr F5=Add F6=Sort F7=Backward
F8=Forward F12=Cancel
3.
Press the Enter key.
4.
Specify a blank value for the arbitration command device corresponding to the supervisor
disk controller.
Also, when you use only a supervisor disk controller, or when you register one primary storage
system, one secondary storage system, and multiple journal groups in to an EXCTG, specify
a blank value for the arbitration command device. Note that if you do so, the arbitration
command device is assumed to be FFFF.
Defining a copy group container 659