HP XP P9500 Storage - Manual (Page 217)

Table 67 How to Prepare the Configuration Files at Each Site (HyperSwap) (continued)
How to Prepare Contents File Type
At the Secondary Site At the Primary Site
Define a copy group A Cnt Ac-J Z copy group
Define a copy group A Cnt Ac-J Z copy group for
Delta Resync
NOTE: If you define the route list, the route list definition file and the command device definition
file will be created at the same time.
Definition procedure (HyperSwap)
First, set the items that need to be set by using Remote Web Console from among the items listed
in
Table 65 (page 214) (excluding a delta resync control path).
This section describes the definition procedure for a 2DC configuration with HyperSwap and
Continuous Access Journal Z.
The following figure indicates the legend of the graphic contents used in the figures represented
in the procedures.
Performing a scan
1. Perform a local scan for the primary storage system and local storage system at the primary
site.
2. Perform a local scan for the remote storage systems at the secondary site.
Defining a 2DC configuration with HyperSwap and Cnt-Ac J Z 217