HP Surestore 64 Director Switch - Manual (Page 79)

Hardware View 63
Mo
ni
to
ri
n
g
a
n
d
Ma
na
g
ing
t
h
e D
ir
e
ct
o
r
FPM Card Menu
Right click a FPM card in the Hardware View to display the following menu options.
• Open Port Card View
Select this option to open the Port Card View. You can also open the Port Card View by
clicking on the FPM card. See Using the Port Card View on page 66 for detailed
information.
• FRU Properties
Select this option to display the FPM card’s Properties dialog box. This dialog box
includes the FRU name, position (slot number in backplane), state (active or failed),
beaconing state (on or off) part number, and serial number (see Figure 18).
• Enable Beaconing
Select this option to add a check mark to the check box and enable beaconing for the
card. This causes the amber LED on the card to flash to help you locate the card in the
unit.
• Block All Ports
Select this option to display the Block All Ports dialog box. Click Yes to block all ports
on the selected card or No to cancel.
• Unblock All Ports
Select this option to display the Unblock All Ports dialog box. Click the Yes button to
unblock all ports on the selected card or click No to cancel.
• Diagnostics
Select this option to display the Port Diagnostics dialog box. Use this dialog box to run
internal loopback and external loopback tests on any port or all ports on the FPM card.
Port Menu
To display the a menu of options for a port on a FPM card, open the Port Card View by
clicking on a port on the FPM card. Refer to Port Menu on page 73 under Using the Port
Card View on page 66 for details on displaying and using the port menu.