HP Surestore 64 Director Switch - Manual (Page 40)

24 Using the Product Manager
to directors. Use this dialog box to add a new firmware version to the HP EFC server
hard disk, modify the description displayed for an existing version, delete a version
from the PC, or download (send) a version for operation on a director. For additional
information on using this option, refer to the hp surestore director fc-64 Installation
and Service Manual (HP A6534-90902).
• Enable E-Mail Notification
The Simple Mail Transfer Protocol (SMTP) server and e-mail recipient addresses are
configured in the HP EFC Manager application (not in the director’s Product Manager).
E-mail notification is also initially enabled in the HP EFC Manager for all directors
managed by the HP EFC Manager. Note, however, that the E-Mail Notification option
on the Product Manager’s Maintenance menu must be enabled (checked) for e-mail
notification to occur for the specific director.
The default setting for the Enable E-Mail Notification function is enabled (checked). To
disable the function, select Enable E-Mail Notification from the Maintenance menu to
clear the check box.
For additional information on using this option, refer to Enable E-Mail Notification on
page 171.
• Enable Call Home Notification
The default setting for the Enable Call Home Notification function is disabled
(unchecked).
Select Enable Call Home Notification from the Maintenance icon’s pop-up menu to
enable the call-home function for the director.
The parameters of the call-home feature are configured in Windows 2000. Refer to the
hp surestore director fc-64 Installation and Service Manual (HP A6534-90902) for
instructions.
The call-home feature may not be available if you are using a customer-supplied server
platform for the EFC Management applications.