HP Surestore 64 Director Switch - Manual (Page 122)

106 Configure Identification
2. Enter a name for the director in the Name field. The name could reflect the director’s
Ethernet network domain name service (DNS) host name, if assigned.
3. Enter a description of the director in the Description field.
4. Enter the location of the director in the Location field.
5. Enter appropriate information about a contact person, such as a phone number, title, or
e-mail address, in the Contact field.
6. Click Set Name as Nickname and add a check mark to the check box if you want to use
the name in the Name field as a nickname for the director’s WWN. The nickname then
displays instead of the WWN in Product Manager views.
7. Click Activate to save the data and close the dialog box.
8. If you are finished configuring the director, back up the configuration data. For more
information, refer to Backup and Restore Configuration on page 173.