HP Surestore 64 Director Switch - Manual (Page 121)

Configure Identification 105
Config
uring the
Di
re
ctor
Configure Identification
Use the procedure in this section to identify the director by its name, description, location,
and contact person. This information displays in the following Product Manager locations:
• Product Manager window title panel (name).
• Director Properties dialog box (name, location, contact, description).
• Identification table at the top of the Hardware View (name, location, description).
• The name also displays in the director icon label in the HP Enterprise Fabric
Connectivity (EFC) Manager Product View if the product name is enabled through the
HP EFC Manager Display Options.
Data entered through the following procedure is saved in nonvolatile random access
memory (NV-RAM) on the director.
Procedure
To configure identification for the director, use the following steps:
1. Select Identification from the Configure menu.
The Configure Identification dialog box displays.
Figure 34 Configure Identification Dialog Box