HP Surestore 64 Director Switch - Manual (Page 177)

Threshold Alert Log 161
Usin
g Lo
gs
• Port
Port number where the alert occurred.
• Type
The type of alert: transmit (Tx) or receive (Rx).
• Utilization %
Percent usage of traffic capacity. This is the percent of the port’s throughput capacity
achieved by the measured throughput. This setting constitutes the threshold value and
is configured through the Configure Threshold Alerts dialog box. For example, a value
of 25 means that threshold occurs when throughput reaches 25 percent of the port’s
capacity.
• Alert Time
The time that the utilization % must exist before an alert is generated. This is set
through the Configure Threshold Alerts dialog box.
• Interval
The time interval during which the throughput is measured and an alert can generate.
This is set through the Configure Threshold Alerts dialog box.