HP Surestore 64 Director Switch - Manual (Page 142)

126 Configure Open Systems Management Server
Configure Open Systems Management Server
Use these procedures to configure the open systems inband management program to
function with the director.
The optional Open Systems Management Server feature must be installed in order to
perform this procedure.
Procedure
To configure open systems management server, use the following steps:
1. Select Management Server from the Configure menu
The Configure Open Systems Management Server dialog box displays.
Figure 44 Configure Open Systems Management Server Dialog Box
2. Click the check box in the Host Control Prohibited field to display a check mark and
prohibit the host management program from changing configuration and connectivity
parameters on the switch. In this case, the host program has read-only access to
configuration and connectivity parameters. Clicking the check box when it contains a
check mark removes the check mark and allows a host program to change configuration
and connectivity parameters on the switch.
3. To activate changes and close the dialog box, click Activate.
4. If you are finished configuring the director, you can back up the configuration data. For
more information, refer to Backup and Restore Configuration on page 8.